1.Safety precautions
1.Ensure the battery is fully charged(under low battery conditions the instrument won’t work properly).
2.Ensure the instrument can rotate 360 degree horizontal mode.
3.The height of the instrument don’t exceed the shoulders!
4.Do not roughly handle the instrument!Do not throw the instrument!Make the instrument away from the fire,water and corrosive chemicals as the roughly handing the instrument will reduce the sensitivity even damaged.
5.Instrument in thunderstorms and the sun can’t use.Instrument can’t
place near the stove or other high temperature environment. Instrument can’t
be placed in the flammable and explosive substances.Probe cables of the plug
can’t even damp, such cases to put the plug in the drying to use or be more lostdetection ability.
6.Please turn off the power and put back in the toolbox after using the instrument.
2.Product introduction:
Congratulations on your selection of our metal detector.it is a long range metal detector designed to precisely pinpoint metallic objects(gold,silver,copper and diam). it can be used for locating metallic objects direction and general place.
Because this device is long range metal detector.its searching range is 0-1500 meters.depth up to 0-25 meters.usually the bigger metallic objects,the deeper machine can detect.and it will have some deviation on searching and depth.but if using and operating machine well.it will reduce deviation.in generally,it needs to spend some time to practice.the harder,the harvest.
3.Product main features:
Super portable:transmitter and receiver are designed in one.it is very portable
and carry is very easy.
it is strong powerful long range metal detector.it will let you more effective to locate metallic objects.
Build in battery,it can be charge after machine hasn’t power.it don’t need to buy extra battery.when power is enough.machine can be used 8 hours.
4.Parameters:
Detection type: gold, silver, copper, diam.
Search range: Max1500M
Detecting depth: Max25M
Charger:12.6V 1A 50/60HZ
Launch frequency: 5.6— 6KHz
Signal frequency: 315— 433Hz
Weight: 2.35kg
5.Boot test:
Turn on power.Scan light will light on the device.When press copper button.corresponding copper indicating light on machine will light.for Silver,Gold and Diam.operation is the same.if corresponding light is light.it displays machine can work usually.
if corresponding light is not light.maybe poweris not enough.it needs to charge for device at first.
How to use new all in one black hawk?
Method 1:
Hand held device,it can’t let device to swing,make sure device is balance.if can’t balance.operation is very difficult.machine hasn’t way to locate metallic objects.after balance,try to test walk along a direction with same speed,if machine pin turned to left side,it means metallic objects are maybe on left side.but it needs it done two-three times to judge.after two-three times same operation.if pin still turned to left side.remember this direction.and then walk ahead along pin directed direction,usually it won’t have any rotation.when we walked on metallic objects.machine will 360 degree rotate,as soon as we walked pass metallic objects.pin will direct back.we may judge metallic objects on our back.and we also may judge place of metallic objects.
Place is between 360 degree rotate’place and pin turned back’place. Checking 4 sides from location of the target gets more accurate result.
Reviews
There are no reviews yet.